bomba de achique automática seaflo de 12v 750 gph
- Marca:
seaflo
- Código producto: B00EV3RU82
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 55.439
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-NEW 12V Automatic Bilge Pump
-Comprehensive user manual with installation instructions and wiring diagram
-750 GPH Pumping Capability
-No separate float switch needed!
Product Description: This product is 100% brand new, and comes packed in original box. Compact, automatic, fully submersible electric pump. Built-in float switch! (No separate float switch is needed). Equipped with built in electronic controlled reed sensor system for easy fully automatic operation. No power use until pump is activated by internal float switch (when water level rises). Compact, efficient, long life motor. Rustproof and corrosion resistant. Stainless steel shaft. High-impact durable plastic housing. Quick release strainer for easy maintenance. Extremely efficient, very low current draw and offer high capacity output. Water cooled long-life motors. Ignition protection to protect the pump against high current. Water/moisture tight seals. Silent and vibrationless operation . Anti-airlock protection. Will not burn out when run dry. Integrated float switch TEST button at rear of unit. Can be used with switch panel for manual override. Beware of inferior non-genuine products on the market that claim to be just as good. Specifications: Voltage: 12V DC. Flow capacity: 750 Gallons per hour (2850 Litres per hour) - 47.5 Litres per minute. Max. Vertical Flow: 11 Feet . Current draw: Only 3 Amp . Hose Outlet: 3/4" (19mm). Dimensions: Length 145mm (5.71") x Width 83mm (3.27") x 103mm (4.05"). 3-wire lead, approx. 3 Feet Long. Approvals: CE. Applications: Typically used in boat hulls / bilges. Bait tanks. Ponds, pools, spas. Other applications where you have to remove water from. Note: These pumps are designed for intermittent use only, NOT designed for continuous use. This is a great alternative to the overpriced Attwood Sahara pumps on the market.
-Comprehensive user manual with installation instructions and wiring diagram
-750 GPH Pumping Capability
-No separate float switch needed!
Product Description: This product is 100% brand new, and comes packed in original box. Compact, automatic, fully submersible electric pump. Built-in float switch! (No separate float switch is needed). Equipped with built in electronic controlled reed sensor system for easy fully automatic operation. No power use until pump is activated by internal float switch (when water level rises). Compact, efficient, long life motor. Rustproof and corrosion resistant. Stainless steel shaft. High-impact durable plastic housing. Quick release strainer for easy maintenance. Extremely efficient, very low current draw and offer high capacity output. Water cooled long-life motors. Ignition protection to protect the pump against high current. Water/moisture tight seals. Silent and vibrationless operation . Anti-airlock protection. Will not burn out when run dry. Integrated float switch TEST button at rear of unit. Can be used with switch panel for manual override. Beware of inferior non-genuine products on the market that claim to be just as good. Specifications: Voltage: 12V DC. Flow capacity: 750 Gallons per hour (2850 Litres per hour) - 47.5 Litres per minute. Max. Vertical Flow: 11 Feet . Current draw: Only 3 Amp . Hose Outlet: 3/4" (19mm). Dimensions: Length 145mm (5.71") x Width 83mm (3.27") x 103mm (4.05"). 3-wire lead, approx. 3 Feet Long. Approvals: CE. Applications: Typically used in boat hulls / bilges. Bait tanks. Ponds, pools, spas. Other applications where you have to remove water from. Note: These pumps are designed for intermittent use only, NOT designed for continuous use. This is a great alternative to the overpriced Attwood Sahara pumps on the market.
