amarine made 12v 45 lpm bomba de agua residual maceradora de montaje en rv para barco rv bomba maceradora marina, autocebante, protección contra funcionamiento en seco, evacuación de residuos
- Marca:
amarine made
- Código producto: B07V1V1LDJ
- Disponibilidad: No hay Disponibilidad.
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Model:MP-4500-12;Voltage:12/24V Head Ft?3 meters ;Max Draw:12A;Volts:12V;AMPS:10.A MAX.AMPS:16.0A;Open Folw:45LPM/12GPM
-The ideal solution for emptying marine holding tanks when not in a discharge restricted area.
-RV discharge mount macerator pump,This pump is made of high quality material, hard and durable. It can remove the impurity from the pump by ignoring or crushing. Easy to install and use. A great choice for you.
-DC macerator waste pump for emptying marine holding tanks, ideal for use when not in a discharge restricted are, also suitable for fish box and livewell receptacles
-Thermally Protected Motor;Intermittent duty cycle.It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.
Macerator pump is designed to empty marine and RV holding tanks of normal waste. It is also an excellent choice for emptyingfish boxes of scales and residual waste. A flow rate of up to 12 gallons per minute conveniently empties any tank in minutes. The unique four-blade design ensures waste is ground up thoroughly. The pump is self-priming to a five foot lift when impeller is wet, four foot lift when impeller is dry, but for optimum performance and life, it should be mounted as close to the tank as possible. Marine pump out must be in proper discharge zones only. This mocerator will not handle hard objects, rags, or feminine napkins.Features: Motor: Seamless can motor Thermally protected Lead Wires:14 GA Fuse: 20 AMP Pump Type:Flexible impeller Duty Cycle: Intermittent duty only.Ports: Inlet: 1-1/2'hose barb & 1-1/2" NPT Male Outlet: 1" hose barb Impeller: Rubber and zinc alloy Blade: 316 stainless steel "Four-Blade" Weight:2.35KG Approvals: CE Typical Flow: Dependent on fluid viscosityWARNING: If the pump is operated in an area containing flammable vapors, the wire leads mast be joined by insulated mechanical locking connectors. Loose or inadequate wire connections can spark, resulting in an explosion. All electrical installations should be done by a qualified electrician. 'Pump should be operated on a separate circuit. 'Pump should be connected to properly sized momentary switch. This prevents pump from damage due to long periods of dry run condition.
-The ideal solution for emptying marine holding tanks when not in a discharge restricted area.
-RV discharge mount macerator pump,This pump is made of high quality material, hard and durable. It can remove the impurity from the pump by ignoring or crushing. Easy to install and use. A great choice for you.
-DC macerator waste pump for emptying marine holding tanks, ideal for use when not in a discharge restricted are, also suitable for fish box and livewell receptacles
-Thermally Protected Motor;Intermittent duty cycle.It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.
Macerator pump is designed to empty marine and RV holding tanks of normal waste. It is also an excellent choice for emptyingfish boxes of scales and residual waste. A flow rate of up to 12 gallons per minute conveniently empties any tank in minutes. The unique four-blade design ensures waste is ground up thoroughly. The pump is self-priming to a five foot lift when impeller is wet, four foot lift when impeller is dry, but for optimum performance and life, it should be mounted as close to the tank as possible. Marine pump out must be in proper discharge zones only. This mocerator will not handle hard objects, rags, or feminine napkins.Features: Motor: Seamless can motor Thermally protected Lead Wires:14 GA Fuse: 20 AMP Pump Type:Flexible impeller Duty Cycle: Intermittent duty only.Ports: Inlet: 1-1/2'hose barb & 1-1/2" NPT Male Outlet: 1" hose barb Impeller: Rubber and zinc alloy Blade: 316 stainless steel "Four-Blade" Weight:2.35KG Approvals: CE Typical Flow: Dependent on fluid viscosityWARNING: If the pump is operated in an area containing flammable vapors, the wire leads mast be joined by insulated mechanical locking connectors. Loose or inadequate wire connections can spark, resulting in an explosion. All electrical installations should be done by a qualified electrician. 'Pump should be operated on a separate circuit. 'Pump should be connected to properly sized momentary switch. This prevents pump from damage due to long periods of dry run condition.
