tuercas de pozo de goma omonic con inserto de latón m6 tuercas de pozo métricas de 6 mm parabrisas de motocicleta

TÉRMINOS Y CONDICIONES

------------------------------------------

- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.
- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.

-Well nuts are used as bodywork and windshield soft mount on a motorcycle, snowmobile, or other high vibration machines.
-10 Pieces M6 well nuts
-As your old well nuts may be distorted and torn you must often measure the screw diameter to determine the correct wellnut size
-M6 Metric Well Nut specs: Overall Height: 16.00mm (0.630") Barrel Diameter: 12.70mm (0.500") Flange Diameter: 16.00mm (0.630") Flange Height: 1.30mm (0.051")
-Well nuts typically do not last for the life of your machine and should be replaced periodically if dried out and cracked

Replace your dried out and damaged rubber wellnuts with a fresh set from Omonic. These are the common larger M6 metric wellnuts that are found on most any Japanese bike, BMW or Ducati. The M6 wellnut is usually found attaching bottom fairings together or used to mount the upper fairing. The smaller M5 wellnut is usually used for attaching the windscreen. If you have a slightly larger wellnut chances are it's this M6 wellnut. Well-nuts typically do not last for the life of your machine and should be replaced periodically if dried out and cracked. Wellnuts are used as bodywork and windshield soft mount on a motorcycle, snowmobile, or other high vibration machines. Sizing & Dimensions We find most windscreen mounts need 5mm well nuts and fairing pieces commonly use both 5mm and 6mm. To determine if your stock well nut is an 4mm, 5mm or 6mm just measure the diameter of the screw threads that fit the well nut. As your old well nuts may be distorted and torn you must often measure the screw diameter to determine the correct wellnut size. Specs on all Desmoparts M4, M5, M6, and M8 well nuts: M4 Metric Well Nut specs: Overall Height: 12.67mm (0.499") Barrel Diameter: 7.92mm (0.312") Flange Diameter: 11.13mm (0.438") Flange Height: 1.32mm (0.052") M5 Metric Well Nut specs: Overall Height: 16.89mm (0.665") Barrel Diameter: 9.53mm (0.375") Flange Diameter: 14.27mm (0.562") Flange Height: 1.02mm (0.040") M6 Metric Well Nut specs: Overall Height: 16.00mm (0.630") Barrel Diameter: 12.70mm (0.500") Flange Diameter: 16.00mm (0.630") Flange Height: 1.30mm (0.051")