aftermokit - abrazadera superior para manillar de repuesto para electra glide ultra classic road glide road king sportster street glide ultra limited antideslizante de 1 pulgada para colgadores ape de 1 pulgada, color negro
- Marca:
aftermokit
- Código producto: B07BWH2LGW
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 82.928
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Aftermarket replacement, No installation instruction included, Please verify your own measurement of mounting hole center before order
-Try this top clamp to help lock in your ape hangers since the OEM wouldn't cut it as the bars would slip, Simply secure allen head set screws to lock handlebars into place that will effectively decrease handlebar slippage
-Package includes: A top clamp, No hardware or riser bushings included, Works with your stock risers and bolts
-Warning! No matter how much it decreases movement and slippage, For Safe Riding, No Yank On Your Taller Bars, Test riding as always
-Fitment: For handlebars with 1" clamping area on 1993-2014 FLH, FLHTCU, FLTR, FLHR, FLHX, FLHTK, Exclude 2015 and up Road King and Road Glide models
See what customers have said:1. Easy to install and work great! My 14 inch bars used to wiggle but quite solid as a rock now.2. Had it for this spring summer and fall, so far awesome! Holds the ape hangers really strong. The 2 stock ones always slid... this has been knurled so it really grip the bar, plus it has 3 set screws to really lock the bars in place.3. Installed on my 2008 Harley Sportster. Item worked perfectly to get rid of factory top clamp with built in speedometer and indicators. Holds bars tight, and has set screws to lock bars in if you are running taller handle bars like Apes.4. It will work as long as your bars drop down to 1" in the clamping area. I installed it on a 1997 softail with 16" apes and it worked good. I drilled little dimples in the bars where the 3 set screws hit the bars for extra holding power.5. Glad I replaced the stock clamp on my 2019 Street Glide when I replaced the handle bars. Look into replacing your riser bushings at the same time. The extra set screws really help secure the new bars to the clamp. Lighter weight but held better than stock.6. Worked perfect on my 2005 Road King with 22inch bars. My bars are finally locked down tight and don't move at all. I wish I would have found this product sooner.7. This was the perfect fix to prevent my new 16" apes from moving. My 03 CVO Road King came with two piece risers, I think 07 and up came with one piece. The two piece risers just wouldn't hold the bars regardless of how tight you secure the screws. I ordered this top cap and once I got the bars in the position that I could use my windshield I ran the 3 set screws into the bar and it was all finished. With the windshield off obviously is when the greatest pressure is on you to pull back and that's when my bars were moving. I rode a couple of hundred miles like that to test it and they were still rock solid.
-Try this top clamp to help lock in your ape hangers since the OEM wouldn't cut it as the bars would slip, Simply secure allen head set screws to lock handlebars into place that will effectively decrease handlebar slippage
-Package includes: A top clamp, No hardware or riser bushings included, Works with your stock risers and bolts
-Warning! No matter how much it decreases movement and slippage, For Safe Riding, No Yank On Your Taller Bars, Test riding as always
-Fitment: For handlebars with 1" clamping area on 1993-2014 FLH, FLHTCU, FLTR, FLHR, FLHX, FLHTK, Exclude 2015 and up Road King and Road Glide models
See what customers have said:1. Easy to install and work great! My 14 inch bars used to wiggle but quite solid as a rock now.2. Had it for this spring summer and fall, so far awesome! Holds the ape hangers really strong. The 2 stock ones always slid... this has been knurled so it really grip the bar, plus it has 3 set screws to really lock the bars in place.3. Installed on my 2008 Harley Sportster. Item worked perfectly to get rid of factory top clamp with built in speedometer and indicators. Holds bars tight, and has set screws to lock bars in if you are running taller handle bars like Apes.4. It will work as long as your bars drop down to 1" in the clamping area. I installed it on a 1997 softail with 16" apes and it worked good. I drilled little dimples in the bars where the 3 set screws hit the bars for extra holding power.5. Glad I replaced the stock clamp on my 2019 Street Glide when I replaced the handle bars. Look into replacing your riser bushings at the same time. The extra set screws really help secure the new bars to the clamp. Lighter weight but held better than stock.6. Worked perfect on my 2005 Road King with 22inch bars. My bars are finally locked down tight and don't move at all. I wish I would have found this product sooner.7. This was the perfect fix to prevent my new 16" apes from moving. My 03 CVO Road King came with two piece risers, I think 07 and up came with one piece. The two piece risers just wouldn't hold the bars regardless of how tight you secure the screws. I ordered this top cap and once I got the bars in the position that I could use my windshield I ran the 3 set screws into the bar and it was all finished. With the windshield off obviously is when the greatest pressure is on you to pull back and that's when my bars were moving. I rode a couple of hundred miles like that to test it and they were still rock solid.
