anillos hubcentric - 56,1 mm id a 67,1 mm od - bujes de plástico de policarbonato negro - compatible con subaru honda acura scion frs y con orificio central de rueda de 67,1 mm
- Marca:
stancemagic
- Código producto: B00AAOEMI2
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 22.425
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-StanceMagic Hub Centric Rings made of corrosion resistant polycarbonate plastic. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.
-HUB RING INNER DIAMETER: 56.1mm (Your vehicle's hub lip diameter needs be this size)
-HUB RING OUTER DIAMETER: 67.1mm (Your wheel's center bore needs to be this size)
-Compatible with 1986-2001 Acura Integra. Compatible with Honda 1982-1989 Accord, 1979-2005 Civic, 1993-1997 Civic Del Sol, 1988-1991 CRX, 2006-2020 Fit, 1979-1991 Prelude. Compatible with 2000-2009 Kia Spectra and 2002-2013 Mini Cooper. Compatible with 2013-2016 Scion FR-S FRS. Compatible with Subaru 2003-2006 Baja, 2013-2020 BRZ, 1998-2020 Forester, 1993-2019 Impreza, 1990-2020 Legacy, 2000-2020 Outback, 2008-2014 Tribeca, 2013-2019 XV.
-IMPORTANT: Before ordering, please measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing.
What are Hub Centric Rings?
(Also called hubrings, hubcentric rings, centering rings)
This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.
Why do I need it?
You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.
How can I confirm fitment?
- Hubrings have 2 measurements, typically in millimeters (mm).
- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 56.1mm. This should match your vehicle's hub bore.
- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 67.1mm. This should match your wheel's centerbore.
Compatibility Information:
These hubrings can fit vehicles with a 56.1mm Hub. Your Wheel Bore must be 67.1mm.
Important Fitment Notes - Required Buyers Check These Before Purchasing
- Buyers must ensure their Vehicle's Hub is 56.1mm.
- Buyers must ensure their Wheel's Centerbore is 67.1mm.
- If you are not unsure about fitment or the measurements, please do not guess. Use the "Have a Question?" section below. Be sure to include vehicle year/make/model.
Installation Advisory
Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.
-HUB RING INNER DIAMETER: 56.1mm (Your vehicle's hub lip diameter needs be this size)
-HUB RING OUTER DIAMETER: 67.1mm (Your wheel's center bore needs to be this size)
-Compatible with 1986-2001 Acura Integra. Compatible with Honda 1982-1989 Accord, 1979-2005 Civic, 1993-1997 Civic Del Sol, 1988-1991 CRX, 2006-2020 Fit, 1979-1991 Prelude. Compatible with 2000-2009 Kia Spectra and 2002-2013 Mini Cooper. Compatible with 2013-2016 Scion FR-S FRS. Compatible with Subaru 2003-2006 Baja, 2013-2020 BRZ, 1998-2020 Forester, 1993-2019 Impreza, 1990-2020 Legacy, 2000-2020 Outback, 2008-2014 Tribeca, 2013-2019 XV.
-IMPORTANT: Before ordering, please measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing.
What are Hub Centric Rings?
(Also called hubrings, hubcentric rings, centering rings)
This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.
Why do I need it?
You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.
How can I confirm fitment?
- Hubrings have 2 measurements, typically in millimeters (mm).
- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 56.1mm. This should match your vehicle's hub bore.
- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 67.1mm. This should match your wheel's centerbore.
Compatibility Information:
These hubrings can fit vehicles with a 56.1mm Hub. Your Wheel Bore must be 67.1mm.
Important Fitment Notes - Required Buyers Check These Before Purchasing
- Buyers must ensure their Vehicle's Hub is 56.1mm.
- Buyers must ensure their Wheel's Centerbore is 67.1mm.
- If you are not unsure about fitment or the measurements, please do not guess. Use the "Have a Question?" section below. Be sure to include vehicle year/make/model.
Installation Advisory
Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.
