42v 2a cargador de entrada 100-240 vac cargador de litio para mx650 10s 36v bicicleta eléctrica xlr enchufe de 3 pines para mx650 10s 36v bike gogo scooter
- Marca:
tangspower
- Código producto: B074SHG3XF
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 46.137
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Input 100 ? 240 VAC 50/60Hz, Output 42V 2A. for electric Sport Bike Drift Trike Tricruiser
-The 105-C output capacitor is globally suitable for input voltage. 100% full load aging test, EMI filter ripple is small. Accuracy- 0.1 A between current and voltage tolerance is- 0.1 V Absolutely not Virtual Mark.
-The charger built-in only needs to disintegrate the fan with radiation around the heat through the housing so some HOT surface charging is very normal but durable.
-The charger protects against short circuit protection / over current protection / over voltage protection. red ? ? charging green light ? ? OK Automatically stops when the rechargeable battery is fully charged.
-Replace your broken charger or add an extra charger with your original charger, work on I750 IZIP I1000 X-560 X-600 X-650 S750 S1000 ST1 MV714 ES08
Description: INPUT SPEC:AC100-240V 50/60HZ charging voltage: 42V charging current: 2A Charging mode: CC-CV charge indicator:Red-Charging Green-Full Charged Charger port: XLR Male / Microphone Head product size:132*57*32MM Cable length: 39.4 In / 100 CM security protection: OVP/OCP/ Overload protection/ Short-circuit protection Packing: 42v 2a battery charger*1 US plug cable*1 Use and maintenance of the charger : 1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug.If you pull the battery plug first while charging, especially when the charging current is large (red light),it is very easy to damage the charger. 2. Please do not run out of battery power, then charge . Otherwise the your battery cannot be protected or even damaged. 3. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting,which is conducive to the activation of long-term immobile material in the deep part of the battery.Luminous means that riding the controller battery undervoltage protection action. 4. If your battery has not been used for a long time (2-3 months), please charge the battery before using the battery.Make sure your battery is not broken. 5.Please use the charger in a dry place. 6.When you do not use the charger, do not always connect the power supply. Tangspower has always devoted itself to providing products with excellent quality for the end-users. If you are not satisfied with our product, let us know and you will be offered a full refund or replacement.
-The 105-C output capacitor is globally suitable for input voltage. 100% full load aging test, EMI filter ripple is small. Accuracy- 0.1 A between current and voltage tolerance is- 0.1 V Absolutely not Virtual Mark.
-The charger built-in only needs to disintegrate the fan with radiation around the heat through the housing so some HOT surface charging is very normal but durable.
-The charger protects against short circuit protection / over current protection / over voltage protection. red ? ? charging green light ? ? OK Automatically stops when the rechargeable battery is fully charged.
-Replace your broken charger or add an extra charger with your original charger, work on I750 IZIP I1000 X-560 X-600 X-650 S750 S1000 ST1 MV714 ES08
Description: INPUT SPEC:AC100-240V 50/60HZ charging voltage: 42V charging current: 2A Charging mode: CC-CV charge indicator:Red-Charging Green-Full Charged Charger port: XLR Male / Microphone Head product size:132*57*32MM Cable length: 39.4 In / 100 CM security protection: OVP/OCP/ Overload protection/ Short-circuit protection Packing: 42v 2a battery charger*1 US plug cable*1 Use and maintenance of the charger : 1. When charging, first connector to the battery, then connect to AC; after full, cut off AC, then pull the battery plug.If you pull the battery plug first while charging, especially when the charging current is large (red light),it is very easy to damage the charger. 2. Please do not run out of battery power, then charge . Otherwise the your battery cannot be protected or even damaged. 3. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting,which is conducive to the activation of long-term immobile material in the deep part of the battery.Luminous means that riding the controller battery undervoltage protection action. 4. If your battery has not been used for a long time (2-3 months), please charge the battery before using the battery.Make sure your battery is not broken. 5.Please use the charger in a dry place. 6.When you do not use the charger, do not always connect the power supply. Tangspower has always devoted itself to providing products with excellent quality for the end-users. If you are not satisfied with our product, let us know and you will be offered a full refund or replacement.
