disco duro ableconn ide40-sat sata o unidad óptica a ide mini adaptador vertical de 40 pines - convertidor de placa base sata hdd / ssd / odd a 40 pines ide pata
- Marca:
ableconn
- Código producto: B017VQSXJK
- Disponibilidad: Traemos a pedido, tiempo de 15 a 25 dias.
-
$CLP 58.341
TÉRMINOS Y CONDICIONES
------------------------------------------
- El producto se trae a pedido, en un transcurso de 15 a 25 dias, si alguna restriccion de un ente gubernamental o de salud publica cambia o restringe vuelos, los pedidos pueden demorar mas tiempo.- Precios pueden cambiar previo aviso. Depende de precio con proveedores o existencia.
- Fotos referenciales del producto, consulte no mas
- Despachamos a todo Chile con Starken.
- Productos importados de Estados Unidos, es probable que los productos electronicos trabajen en 110V y NO en 220V, podria usar un transformador, para mas informacion primero nos puedes preguntar todas las inquietudes que tengas.
-Convert any SATA drive into 40-pin IDE interface just like a standard IDE/ATAPI drive. Ideal for computers or embedded systems that are not equipped with SATA controllers.
-Supports any type of SATA III, SATA II and SATA I Devices such as Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk, etc.
-Complete hardware solution; no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support IDE/ATAPI storage devices
-Mini vertical board with size only 3" (L) x 0.9" (W) and mount directly to the back of SATA drive.
-Fully RoHS compliant. Made in Taiwan.
The Ableconn IDE40-SAT allows you to install a SATA drive to the motherboard with IDE/ATA connector. It's the easiest and cost effective solution to replace existing IDE drives with newer cost-effective SATA drives to your systems that are only equipped with IDE interfaces. Features * Connector: - 1 x IDE (40-pin, PATA) Male (to be connected with a standard 40-pin IDE cable) - 1 x SATA Data & Power (7 + 15 pins) (direct attach to SATA drive) - 1 x SP4 (4-pin; floppy style small drive power) Male * Chipset: Marvell 88SA8052 * Data transfer rate: - Up to 150 MBps * Jumper Selection: - 1 x jumper for selection of Master/Slave/Cable Select modes * Software: - OS independent; No driver installation required - Support Windows, Macs, and Linux * SATA II 3Gbps controller Mini vertical Adapter Board * Supports any type of SATA III, SATA II and SATA I Device (Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk) * Convert a SATA Drive like a standard IDE/ATAPI Drive * 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB * Compliant with Serial ATA 2.6 * Bootable * Jumper setting support IDE Master, Slave and Cable Select Modes * Tag Command Queuing (Max 32 entries) * ATA/ATAPI PIO mode data transfer * ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s * ATA/ATAPI-7 Streaming feature set * Fully RoHS compliant * Made in Taiwan Package Contents * Ableconn IDE40-SAT IDE to SATA Hard Drive or Optical Drive Mini Adapter * 1 x Y Power Cable (LP4 Molex to LP4 +SP4)
-Supports any type of SATA III, SATA II and SATA I Devices such as Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk, etc.
-Complete hardware solution; no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support IDE/ATAPI storage devices
-Mini vertical board with size only 3" (L) x 0.9" (W) and mount directly to the back of SATA drive.
-Fully RoHS compliant. Made in Taiwan.
The Ableconn IDE40-SAT allows you to install a SATA drive to the motherboard with IDE/ATA connector. It's the easiest and cost effective solution to replace existing IDE drives with newer cost-effective SATA drives to your systems that are only equipped with IDE interfaces. Features * Connector: - 1 x IDE (40-pin, PATA) Male (to be connected with a standard 40-pin IDE cable) - 1 x SATA Data & Power (7 + 15 pins) (direct attach to SATA drive) - 1 x SP4 (4-pin; floppy style small drive power) Male * Chipset: Marvell 88SA8052 * Data transfer rate: - Up to 150 MBps * Jumper Selection: - 1 x jumper for selection of Master/Slave/Cable Select modes * Software: - OS independent; No driver installation required - Support Windows, Macs, and Linux * SATA II 3Gbps controller Mini vertical Adapter Board * Supports any type of SATA III, SATA II and SATA I Device (Blu-ray Disc, SSD, DVD, DVD-RAM, CD-ROM, CD-RW, Hard Disk) * Convert a SATA Drive like a standard IDE/ATAPI Drive * 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB * Compliant with Serial ATA 2.6 * Bootable * Jumper setting support IDE Master, Slave and Cable Select Modes * Tag Command Queuing (Max 32 entries) * ATA/ATAPI PIO mode data transfer * ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s * ATA/ATAPI-7 Streaming feature set * Fully RoHS compliant * Made in Taiwan Package Contents * Ableconn IDE40-SAT IDE to SATA Hard Drive or Optical Drive Mini Adapter * 1 x Y Power Cable (LP4 Molex to LP4 +SP4)
